nodular iron

英 [ˈnɒdjʊlə ˈaɪən] 美 [ˈnɑdʒələr ˈaɪərn]

网络  球墨铸铁; 球铁; 黑色金属

机械



双语例句

  1. There exists non-equilibrium abnormal crystal in nodular iron of metal mould during the solidification of grinding ball.
    金属型球铁磨球凝固时存在非平衡异晶相。
  2. Producing Motor Rear Axle Housing with as cast Ferrite Nodular Iron Which is Melted in Cupola Furnace
    冲天炉是熔炼铸铁件的主要设备。冲天炉熔炼生产铸态球铁汽车后桥壳
  3. The result showed that the Rockwell hardness of the high pearlite-containing nodular iron camshaft increased with increasing of its nodularity and pearlite content.
    结果表明,高珠光体含量球铁凸轮轴的洛氏硬度随着球化率和珠光体含量的升高而增加。
  4. Investigation and Application Of High Ni-Cr-Mo Chilled Rolls with Nodular Iron Core for Levellers
    高镍铬钼冷硬球芯平整机轧辊的试制与应用
  5. Theory basis of development of low-alloy abrasive resistant nodular iron used for mill ball
    低合金耐磨球墨铸铁磨球研制理论依据
  6. Neck Shrinkage Control of Composite Rollers with Nodular Iron as Core Material
    离心铸造球铁芯复合轧辊辊颈缩松的控制
  7. Influence of Inoculants and Inoculation Process on Structure and Properties of Nodular Iron
    孕育剂及孕育工艺对球铁组织及性能的影响
  8. Discussion on the Effect of Chromium in Nodular Iron& Application of Cr in As-Cast Nodular Iron(ⅱ)
    Cr在球铁中的作用探讨&Cr在铸态球铁中的应用(2)
  9. The quality control of cored-wire injection process used for production of as-cast ferrite nodular iron was described.
    介绍用喂线球化工艺生产优质铸态铁素体球墨铸铁的质量控制要点。
  10. The copper-adding process and its effect on structure and properties of nodular iron was introduced.
    本文介绍了铜在球铁中的加入工艺及其对组织和性能的影响。
  11. Microstructure and Properties of Cr-Alloyed As-Cast Nodular Iron& Application of Cr in As-Cast Nodular Iron(ⅰ)
    Cr合金铸态球墨铸铁的组织和性能&Cr在铸态球墨铸铁中的应用(1)
  12. One kind of nodular iron with molybdenum and moderate silicon was developed according to foreign relevant technical standards.
    根据国外相关技术标准,设计、研制了中硅钼球墨铸铁,并测试、分析了其铸态组织、力学性能、抗高温氧化性能。
  13. The paper is about how to obtain the densified structure of heavy-wall nodular iron castings under the condition of gravity foundry and to introduce the authors research in this area in detail.
    较为详细地介绍了如何在重力铸造条件下获得厚壁球铁件致密度组织这一课题开展的研究内容。
  14. JMC Casting Plant ( JCP) specializes in producing automobile engine, gray iron and nodular iron castings, which are thin-walled, and in high strength.
    江铃铸造厂是以生产发动机铸件及车用薄壁高强度灰铁和球铁铸件为主的专业铸造厂。
  15. A Discussion on Principal Problems with Production of Heavy Gray and Nodular Iron Castings
    大型灰铁及球铁件生产中的主要问题讨论
  16. No foundry harmful elements, especially suitable for stable production of big nodular iron castings, wind power castings and steel castings.
    无铸造有害元素,特别适合大型球铁件、风电铸件和铸钢件的稳定生产。
  17. Main products: gray iron and nodular iron castings for automotives, locomotives, refrigeration compressors and various.
    主导产品为汽车,火车,制冷压缩机及各种机械的灰铁铸件和球墨铸件及其机械加工。
  18. The bracket of as-cast ferritic nodular iron breaks due to brittle fracture when it is assembled.
    铁素体球铁铸件支架在装配时发生脆性断裂失效。
  19. By statistical analysis, the relationship between the matrix hardness of the high pearlite-containing nodular iron and its nodularity and pearlite content was investigated.
    通过统计分析,研究了高珠光体含量球铁的基体硬度与球化率和珠光体含量的关系。
  20. Lost Foam Casting Process of Nodular Iron Main Driver Housing
    球墨铸铁主传动器壳体消失模铸造工艺
  21. Large availability of construction materials: nodular iron, stainless steel, bronze and other special alloys.
    可用的材质很多:球铁,不锈钢,铜以及特殊合金。
  22. The Study of Heat Treatment for Nodular Iron of Low Carbon Austenite Conditioning and Part Austenite Conditioning
    球墨铸铁低碳奥氏体化和部分奥氏体化热处理研究
  23. Analysis and Research for Fine Inclusions in Nodular Iron Parts Spheroidized in Casting Mould
    型内球化法成形球铁件中微细夹杂物的分析研究
  24. The quantitive relationship between elastic modulus and sphere rate of rare-earth magnesium nodular iron is shown.
    本文用动态敲击法对稀土镁球墨铸铁的弹性模量E值与金相组织及抗拉强度值之间的关系进行了初步探讨。
  25. The foundry method design of a nodular iron reductor housing with ferrite matrix was de-scribed.
    介绍了铁素体基体球铁减速器壳体的铸造工艺设计。
  26. Results provide the basis for steady production of piston rings and thin-wall castings with nodular iron.
    为稳定生产单体铸造球铁活塞环和应用到薄壁球铁件的生产提供了依据。
  27. In this paper the influence of main processes on the hard spots in nodular iron castings has been discussed.
    本文叙述了主要工艺因素对球铁中硬点的影响。
  28. Application of Alloy Cord Technique in Production of Nodular Iron
    合金芯线技术在球墨铸铁生产中的应用研究
  29. Effect of Laser Hardening Parameter on Microstructure and Properties of Bainite Nodular Iron
    激光淬火工艺参数对贝氏体球铁组织和硬度的影响